Gents, do you know how to fold a suit jacket? As far as aggravating clothing maintenance goes, packing and transporting suits is pretty high on the list.

A good wool jacket combines two major problems when it’s not on your shoulders. First, it’s bulky. Second, it’s vulnerable to permanent creasing if a fold gets pressed into the fabric.

You can steam or iron those out later but that’s extra work and hard on the jacket’s longevity. It’s a problem that cries out for a solution.

Fortunately, we have three for you. Check them out below!

  • The tucked-shoulder fold
  • The shirt-style fold
  • The jacket roll
  • Transporting a suit jacket – steps you can always take

Suit Jacket Fold #1 – Tucked-Shoulder Fold

This fold distributes pressure in a suitcase from being applied to folds and seams.

This one does involve a large fold down the center of the jacket. That means it’s not quite as crease-proof as a good roll.

That said, you often have to fold a jacket to get it into a suitcase — especially when space is very limited — and a flat fold is sometimes the only way to go. This one’s better than most, and reduces the number of folds that aren’t on seams to one.

Basically, you gently work one shoulder inside-out, then tuck the other shoulder into it, seam against seam. The sleeves lie straight down the jacket, one on top of the other, and the breast panels (with their linings turned outward) sandwich the whole thing. Then you fold it in half from the bottom and pack it away.

This one’s good for when you need a flatter fold than a roll and the jacket is going to be stowed for a while. If you’re good about not stacking too much weight on it, the crease down the middle shouldn’t set, and you’ve got the jacket lining protecting the outside of the jacket from any wear or tear.

Its big disadvantage, other than the single fold that can potentially crease, is that it can take a couple tries to get it right, and that you generally need a clean flat surface to do it on. It can be done standing and holding the jacket, but it’s tricky.

Suit Jacket Fold #2 – The Shirt-Style Fold

For when you’re on the go and need a quick fold.

For the guy on the go, sometimes the easiest way to deal with the jacket is just to quickly fold it over like a dress shirt.

The sleeves tuck behind the back, with the shoulders overlapping slightly at the middle, and the whole thing gets folded in half from the bottom, tucking the bottom hem up underneath the collar. The lapels and collar sit right on top, and you get a pretty neat square shape.

The resulting bundle is about the same size as the one you get in Option #2, but a little thicker in the middle and not quite as even.

The big problem here is that you’re folding the jacket in several places, both vertically and horizontally. That’s a good way to get at least some creases, especially where the folds cross each other.

So why bother mentioning it? It’s a lot quicker to throw together than the other two folds, and it’s easy to do without a flat surface. You just tuck the collar of the jacket under your chin and make three quick folds, and bam, you’re done.

If you know you’re just going to be throwing the jacket on top of a case for a short period, this’ll work just fine. For longer travel, or if it’s going to have weight pressing down on it, you’re better off with one of the other methods.

Suit Jacket Fold #3 – The Jacket Roll

suit jacket roll
Want the best protection against wrinkles? Roll, don’t fold.

My personal favorite!

To get the least number of folds possible, there’s an easy solution: don’t fold the jacket at all.

You still need to do some creative tucking and layering. But, it is possible to roll the whole jacket up (rather like a sleeping blanket or sleeping pad) into a soft tube of fabric.

The big advantage here is that, properly done, a rolled jacket is never folded across the fabric. Most of the action happens around the shoulders and sleeves, which are made to flex, and the broad front and back panels of the jacket get bent gently into a curve rather than pressed flat into a corner.

You can also usually tuck a shirt or a couple pairs of underwear into the roll, if you’ve got a deep enough suitcase. Just don’t try to cram too much in there — the roll won’t hold as well, and you’ll be more likely to wrinkle your jacket in the process.

The main disadvantage of a roll is that it takes up more space (especially vertical space) than a flat fold. It can sometimes take a few tries to get it right with no wrinkles.

And remember, you need to take those extra tries. If you force the jacket into storage with interior wrinkles, they’re likely to crease.

Transporting a Suit Jacket – Steps You Can Always Take

Whatever method you choose for folding and storing your jackets, there are a couple of ways to minimize the damage:

  • First off, avoid folding the jacket at all. If you’re flying, wear at least one of your jackets onto the plane. This way you don’t have to pack it at all, apart from maybe a couple hours in the overhead.
  • Use a full-length garment bag and keep the jacket on a hanger. These work on airplanes or in cars, but they’re limited in carrying capacity.
  • If you do have to fold, minimize the number of folds needed, and try to keep them along the seams. The less you have to fold across a flat plane of fabric, the better.
  • Where possible, stow the jacket with the lining facing outward, not the surface. If the jacket lining gets scuffed, stained, or torn in transport, it won’t show when you’re wearing it. Whereas, damage on the outside can ruin the jacket, or at least require immediate repair.

It doesn’t do anything about the bulk (we’ll show you some creative folds in a minute that will help with that). But, treating the jacket gently in the first place, no matter what you’re doing, can help it get to its destination crease-free and ready to wear.

The Next Step…

Pretty good article, huh?

Well remember, all this information is great but you have to TAKE ACTION!

Discover my premium style course for men.

Click below to watch the video – 3 Ways To Fold A Suit Jacket Without Damage

The post 3 Simple Ways To Fold A Suit Jacket appeared first on Real Men Real Style.

Read More

——————–

By: Antonio
Title: 3 Simple Ways To Fold A Suit Jacket
Sourced From: www.realmenrealstyle.com/how-to-fold-suit-jacket-3-ways/
Published Date: Wed, 04 Aug 2021 16:25:00 +0000

Comments

0 comments